Wire Both Ends to T568B
A free 220-1201 performance-based question on Ethernet Cabling and Physical Networking. Read the scenario, complete the task, and submit — it grades instantly with an explanation, no account needed.
Performance-Based Question
RJ45 WiringWire Both Ends to T568B
(OBJ.3.2)
Scenario
Work order: a new desk in the sales bay needs a patch cable to get the workstation from its wall jack to the PC. The site standard for this building is T568B, and a computer-to-wall-jack patch cable is an ordinary straight-through cable, so both ends are terminated to T568B — the same standard on each plug. You have the cable stripped and the pairs fanned out. Load the conductors into both ends: • Connector A: T568B • Connector B: T568B Pin 1 is on the left, with the plug's clip facing away from you and the contacts toward you. All eight pins on each connector are graded, so seat every conductor in both plugs before you submit.
These instructions stay visible beside the interface while you work.
Study this section
Lessons and practice for Section 10 — Ethernet Cabling and Physical Networking.
- Free Ethernet Cabling and Physical Networking practice questions →
- Introduction to Ethernet and Physical Networking
- Copper Ethernet Cabling
- Ethernet Connectors and Wiring Standards
- Ethernet Speeds and Distance Limitations
- Fiber-Optic Cabling
- Structured Cabling
- Power over Ethernet
- Network Interface Cards and Ethernet Adapters
- Ethernet Ports, Link Lights, and Activity Lights
- Cabling and Networking Tools
- Coaxial Cable and the F-Type Connector